Intellitec Battery Disconnect Relay W/OUT ATC Fuse #01-00055-002 Battery Disconnect provides a simple and safe means of remotely disconnecting batteries of an RV or boat. With a touch of a remote switch, the batteries will be completely disconnected, preventing unwanted drain when the RV or boat are put into storage.
The heart of the system is a unique latching relay developed specifically for this purpose. While this relay is capable of carrying heavy currents, it require NO power to stay open or closed. It only draws power during activation. The relay is sealed against the environments and is designed to withstand the stock and vibration experienced in the most severe RV or boat applications. THE RELAY– How it Works The Battery Disconnect Relay is a mechanically latching switch that operates by the momentary application of battery voltage to the coil terminals in one direction for latching (closed) or the other direction for unlatching (open).To close the relay, +12 volts is applied to the “IÂ” terminal and ground the “SÂ” terminal of the relay. When this is done, the plunger is pulled into the coil and the contacts are connected. While this happens, the rod magnet suspended above the plunger is attracted (opposite poles attract) to the top of the plunger by the magnetic field. When the voltage is removed from the coil, the plunger gets pushed upward by the return spring, but cannot move because the rod magnet is in the way. To open the relay, +12 volts is applied to the SÂ” terminal and ground on the IÂ” terminal. When this is done, the plunger is again pulled into the coil. However, since the magnetic polarity of the coil is reversed, the rod is repelled (like poles oppose), and swings out of the way. When the voltage is removed from the coil, the plunger gets pushed upwards by the return spring, breaking the connection between the two large terminals.
|Relay Actuation Voltage||10.5 Volts|
|Continuous Carry Current||100 Amps max.|
|Short Term Carry Current||500 Amps (30 seconds max.)|