🚚 FREE SHIPPING on ALL Orders over $75.00 🚚

Capture Plate - Compatibility chart

Every SuperGlide Hitch Needs a Capture Plate to Function

SO LETS FIND THE RIGHT PLATE FOR YOUR TRAILER’S KING PIN BOX...

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.

CPF_measure_pic.png

1) Find the manufacturer’s name and model number located on your pin box.

 2) Then find the Quick Connect part number that corresponds to that information.

 3) To ensure correct fit, make the necessary A, B and C measurements:

 A: Measure the king pin plate from side-to-side. This is the most important measurement.

Be sure that this measurement is no more than 1/16” less than the measurement listed in the column below.

 B : Measure from the leading edge of the king pin to the leading edge of the king pin plate.

 C : Measure from the rear edge to the leading edge of the king pin plate.

King Pin Box Manufacturer

Part Number

King Pin Box Model#    

Measurement A

Measurement B

Measurement C

5th Airborne

14-3341

Most Models

10-1/2"

6-7/8"

14-1/4"

5th Airborne

14-0939

Most Models

12"

7-7/8"

19-7/8"

Demco (not for use w/ Universal)

14-3344

Most Models

10-3/4"

5"

11-7/8"

Demco not for use w/ Universal)

14-3358

Most Models

11-1/4"

5-1/8"

12-1/16"

Dexter

14-3414

Most Models

12"

5-9/16"

12-1/4"

Fabex

14-3320

500's, 765, 770*

13-1/2"

3-1/4"

9-1/4"

Fabex

14-3348

Most Models

12"

4-5/8"

11-3/8"

Leland

14-3356

Most Models

14"

5-1/2"

12-1/4"

Lippert (long)

14-3345

1621*

12-3/4"

3-3/8"

8-7/8"

Lippert (long)

14-3315

1621 HD*

12-3/4"

4"

8-7/8"

Lippert (long)

1621*

13-1/4"

3-3/8"

8-7/8"

Lippert (medium)

14-3347

1116*

13-1/4"

3-1/2"

9-3/16"

Lippert (long)

14-3347

1716*

13-1/4"

3-1/4"

8-7/8"

Lippert

14-3333

0719**

12-3/4"

6-3/8"

12-1/4"

Lippert Rhino Box

02-3452

Rhino

7-3/8"

2-5/16"

7-3/4"

MOR/ryde (not w/ Universal or Multi-fit)

14-3357

Rubber Cushion

13-1/2"

7-5/16"

17-1/2"

MOR/ryde (not w/ Universal or Multi-fit)

14-1244

Standard

12-1/2"

4-1/8"

8-7/8"

Trailair Rota-Flex/Road Armor (not w/ Universal or Multi-fit)

14-3312

Most Models

13-3/8"

5-3/8"

11-7/16"

Trailair Rota-Flex/Road Armor (not w/ Universal or Multi-fit)

14-0940

Most Models

13-5/8"

5"

11-7/16"

Trailair Flex-Air

14-2407

Most Models

13-1/4"

6-1/8"

12-3/4"

Trailair Tri Glide Airbag/Shock Pin Box

14-3311

Tri Glide Only

12-3/4"

5-15/16"

ALL

Trailair Airbag/Shock Pin Box

14-3416

Most Models

13-3/8"

7-3/8"

13-1/2"

Reese Revolution

14-2228

10K Pin Box

10-1/2"

4-1/4"

11"

Reese Revolution for 16K w/ spacers)

14-2229

16K or 21K Pin Box

13" or 12-1/2"

4-1/4"

11-3/4"

Multi-fit and Universal Capture Plates

Multi-fit Capture Plate

14-3346

*Fits the indicated pin boxes above

12-3/4" through 13-1/2" and 14"

2-9/16" -- 4"

ALL

Multi-fit Capture Plate

14-3304

**Fits the indicated pin boxes above

12", 12-1/4" or 12-3/4"

5-3/16" -- 6-5/8"

ALL

Universal Capture Plate Kit

14-2979

INCLUDES:  Universal Capture Plate, Fore & Aft Plate Extensions, Knee Braces & Hardware